REL HT/MKII - HT;1003 MKII Specifications; HT;1003 MKII Technical Specs

Type: Closed box, front ring woofer
Drive Unit: 10 in., carbon ber reinforced cone with inverted carbon ber center cap
In Room
Frequency Extension: -6dB at 24Hz in Room
Input Connectors: Low Level stereo RCA, LFE RCA
Output Connectors: Low Level stereo RCA, LFE RCA
Power Output: 300 was (RMS)
Phase Switch: 2 - posion, 0 or 180 degrees
Amplier Type: Class D
Fully Electronic with SET-SAFE: Yes
DC Fault: Yes
Output Short: Yes
Mains Input Voltage: 220-240 volts, 110-120 volts for certain markets
Fuses: 2.5 Amp semi delay 230V operaon
5 Amp semi delay 115V operaon
Dimensions
W x H x D, Inc. Feet: Including feet and rear panel controls
14.25 x 13.25 x 15.25 in., (362 x 343 x 387 mm)
Net Weight: 34.2 lbs. (15.5 kg)
Shipping Weight: 41 lbs. (18.6 kg)
Finish: Horizontally Oriented Line Grained Composite,
15 mm Top Plate, nished in 5 coats of hand-rubbed high gloss lacquer
Supplied Accessories
Mains Lead: Included
Users Setup guide: Online
In the interest of product development, REL Acouscs Limited reserve the right to vary these specicaons without noce
18
HT/1003 MKII Specicaons