4
CAUTION: For safety purposes remove the battery and retain the knife guards at
the lowest possible
location while the machine is not in use. Also keep the guard
as close as possible to the fabric while cutting.
H. Re
p
lacing the Grinding Wheel *remove the battery first **
1
. Hold the grinding wheel's outer circle with your hand, insert the bolt
into
the po
sitio
n
ing hole on the shaft, lock the wheel, then rotate in
the direction indicated by the arrow.
2.
Remove the old grinding wheel and rep
lace it with with the new one.
Figure 7.
To Next Page
Loading...
