10
STARTING UP
The two brush attachments are pushed firmly onto the accessory adaptor.
Even the most stubborn dirt can be removed from a variety of surfaces using the
small nylon brush (Fig.12) The larger nylon brush, (Fig.13) is suitable for heavy
staining on less sensitive materials such as stainless steel or stone. The brush
nozzles are removed by simply pulling them off with a downward movement.
The 2-in-1 nozzle consists of a right—angled steam attachment onto which the win-
dow cleaner can be attached. Push the right—angled steam attachment firmly onto
the detail nozzle. Pull the cotton cover over the nozzle for more thorough cleaning
and to protect the work surface (Fig .14). Attach the rubber blade to tie right-
angled steam attachment if windows, mirrors or tiles are to be cleaned (Fig. 15).
CAUTION
Glass may crack if subjected to thermal shock! Pre-heat areas of glass prior to
steam cleaning by spraying steam in a wider arc from a distance of 20-25 cm.
Slowly reduce the distance to lO-l5 cm to heat the glass up further.
To Next Page
Loading...
