Press the switch, steam will come
out of from steam gun.
The round button is used to
regulate the steam volume
from minimum steam output
to maximum steam output.
When those two symbols are
illuminated, it means maximum
steam output is activated.
When this symbol is illuminated,
minimum steam output is activated.
When this symbol is illuminated, the pressure is up to 5Bar and steamer is ready.
Before beginning, remove condensed water and moisture from the hose by
pressing the steam trigger for approximately 15 seconds. To do this, press the
switch on the control handle; move the handle away from you and press the
switch on the handle to release steam into a towel or bucket.
（Pressure Guage）
（button for release steam）
（switch for different steam setting）
11
To Next Page
Loading...
