CAUTION
1. Never leave the machine unattended when it's plugged in.
2. Never remove the tank locking cap while the machine is running and
always check, before removing it, that no steam is coming out of
the iron.
3. The tank-locking cap must be replaced with original spare parts. DO
NOT TIGHTEN THE CAP TOO MUCH AS IT WILL CAUSE THE
PLASTIC TO CRACK. MAKE SURE IT IS "SNUG".
4. For a longer life and better machine performance, we suggest you to
rinse (blow-down) the tank once a day using the valve on the side of
the steamer. Check that no more steam comes out of the nozzle or
gun before you open the valve. Let all of the water flow out of the
steamer into a bucket (not supplied), and then close the valve.
5. The use of normal tap water is recommended for the i700A/B &
i702C.
6. Make sure you refill the steamer before you turn it back on.
7. The warranty does not cover mineral damages due to not cleaning
the steamer.
8. Service: If you need to have this product serviced, please contact
only authorized technical assistance centers (for further information
please call 1-800-268-1649 or visit our web site at
www.reliablecorporation.com).
TECHNICAL DATA
Working voltage: 120V (i700A-B-i702C)
Nominal capacity of the tank: 9 Liters
Boiler power: 1 heating element 1200W (i700A-B-i702C)
Power consumption: 15 amps (i700S-B- i702C)
Service pressure: 3,5 Bar/4 Bar
Maximum pressure: 5,5 Bar
To Next Page
Loading...
