Need help?Do you have a question about the Reloop Jockey 3 Remix and is the answer not in the manual?
Blends audio between channels assigned to left/right of crossfader.
Volume Faders adjust sound of selected software Deck based on Deck Switches.
Sends channel's pre-fader signal to Cue Channel for monitoring. Enables Fader Start with SHIFT.
Adjusts high (treble), middle (mid), and low (bass) frequencies.
Adjusts audio level (gain) of the corresponding channel.
Play/Pauses the track. Hold SHIFT to manually tap the tempo.
Sets a Cue point or previews track. Hold SHIFT to change FX Mode.
Temporarily pauses track when pressed. Hold SHIFT to enable/disable Master Tempo.
Syncs deck with opposite. Hold SHIFT to set deck as Master Deck.
Adjusts the Tempo of the track.
Enables/disables selected effect. In Multi FX, selects bank 1 effect. Records sampler slot 1.
Blends audio between channels assigned to left/right of crossfader.
Volume Faders adjust sound of selected software Deck based on Deck Switches.
Sends channel's pre-fader signal to Cue Channel for monitoring. Enables Fader Start with SHIFT.
Adjusts high (treble), middle (mid), and low (bass) frequencies.
Adjusts audio level (gain) of the corresponding channel.
Play/Pauses the track. Hold SHIFT to manually tap the tempo.
Sets a Cue point or previews track. Hold SHIFT to change FX Mode.
Temporarily pauses track when pressed. Hold SHIFT to enable/disable Master Tempo.
Syncs deck with opposite. Hold SHIFT to set deck as Master Deck.
Adjusts the Tempo of the track.
Enables/disables selected effect. In Multi FX, selects bank 1 effect. Records sampler slot 1.
General| Connectivity | USB |
|---|---|
| EQ | 3-band EQ per channel |
| USB Interface | Yes |
| Crossfader | Yes |
| Effects | Filter per channel |
| MIDI | Yes |
To Next Page
