Need help?Do you have a question about the REMEZA SB4/C-100.LB75 and is the answer not in the manual?
Manufacturer reserves the right to make minor constructive changes to the product without prior notice.
Outlines the compressor's function, application in industry, power supply, climate, and operating mode.
Details thermal protection against overload/phase faults and optional equipment like oil segregator.
Directs users to pictures for general views and the principal electric scheme.
Lists compliance standards (EN) and refers to tables for main technical and electrical characteristics.
Details characteristics of wedge-type belts, electrical equipment, and recommends greasing substances.
Presents a list of components delivered with the compressor, referencing Table 4.
Lists the primary assembly units and components that constitute the compressor system.
Describes the functions of major components like the compressor module, receiver, and electric engine.
Explains the roles of the pressostate, safety valve, and other control/safety devices.
Details the functions of auxiliary components such as the bay, unloading air channel, spigot, check valve, and discharge cock.
Covers authorized personnel, site placement, environmental protection, and air intake quality requirements.
Addresses ventilation, filter maintenance, and limitations on compressor usage for other gases.
Focuses on safe connection, moving, pre-start checks, and technical testing procedures.
Details safety measures for receiver operation, noise control, waste disposal, and fire prevention.
Lists specific actions and modifications that are forbidden during compressor operation and maintenance.
Emphasizes reading the manual, performing the first start with trained personnel, and checking package contents.
Guides on mounting, placement, checking unit labels, passport data, oil level, and voltage.
Warns about engine rotation direction and provides guidance on connecting to consumers.
Covers starting/stopping, pressure adjustment, thermal protection, nominal operation mode, and post-shutdown air release.
Details maintenance tasks for the first 50 hours, monthly checks, and the oil change schedule.
Covers air filter cleaning, condensate discharge, belt tension adjustment, and fastening checks.
Recommends periodic checks on engine controls and external cleaning for cooling efficiency.
Addresses common malfunctions like productivity slowdown, pressostate air leaks, and motor overheating.
Covers compressor shutdowns, vibration problems, starting issues, and oil excess in air/receiver.
Outlines the manufacturer's guarantee, warranty period, and guidance for service consultation.
Specifies passport completion requirements and conditions that lead to the loss of warranty rights.
Details approved methods for transportation and environmental conditions for storage.
Manufacturer reserves the right to make minor constructive changes to the product without prior notice.
Outlines the compressor's function, application in industry, power supply, climate, and operating mode.
Details thermal protection against overload/phase faults and optional equipment like oil segregator.
Directs users to pictures for general views and the principal electric scheme.
Lists compliance standards (EN) and refers to tables for main technical and electrical characteristics.
Details characteristics of wedge-type belts, electrical equipment, and recommends greasing substances.
Presents a list of components delivered with the compressor, referencing Table 4.
Lists the primary assembly units and components that constitute the compressor system.
Describes the functions of major components like the compressor module, receiver, and electric engine.
Explains the roles of the pressostate, safety valve, and other control/safety devices.
Details the functions of auxiliary components such as the bay, unloading air channel, spigot, check valve, and discharge cock.
Covers authorized personnel, site placement, environmental protection, and air intake quality requirements.
Addresses ventilation, filter maintenance, and limitations on compressor usage for other gases.
Focuses on safe connection, moving, pre-start checks, and technical testing procedures.
Details safety measures for receiver operation, noise control, waste disposal, and fire prevention.
Lists specific actions and modifications that are forbidden during compressor operation and maintenance.
Emphasizes reading the manual, performing the first start with trained personnel, and checking package contents.
Guides on mounting, placement, checking unit labels, passport data, oil level, and voltage.
Warns about engine rotation direction and provides guidance on connecting to consumers.
Covers starting/stopping, pressure adjustment, thermal protection, nominal operation mode, and post-shutdown air release.
Details maintenance tasks for the first 50 hours, monthly checks, and the oil change schedule.
Covers air filter cleaning, condensate discharge, belt tension adjustment, and fastening checks.
Recommends periodic checks on engine controls and external cleaning for cooling efficiency.
Addresses common malfunctions like productivity slowdown, pressostate air leaks, and motor overheating.
Covers compressor shutdowns, vibration problems, starting issues, and oil excess in air/receiver.
Outlines the manufacturer's guarantee, warranty period, and guidance for service consultation.
Specifies passport completion requirements and conditions that lead to the loss of warranty rights.
Details approved methods for transportation and environmental conditions for storage.
General| Type | Piston |
|---|---|
| Voltage | 400 V |
| Max Pressure | 10 bar |
| Tank Capacity | 100 L |
| Noise Level | 75 dB |
To Next Page