4
• Do not plug or unplug the appliance with wet hands.
• Do not twist or kink the cable, or wrap it round the appliance.
• This appliance is not intended for commercial or salon use.
KEY FEATURES
1. On/o switch
2. Foil screens
3. Cutter assembly
4. Charging indicator
5. Power port
6. Pop-up trimmer
7. Head release buttons
Not shown:
8. Head guard
9. Adaptor
10. Cleaning brush
GETTING STARTED
• It is recommended to fully charge your appliance before using it for the rst time.
• Ensure the product is switched o.
• The adaptor automatically adjusts to a main voltage between 100V and 240V.
• Connect the shaver to the adaptor and then to the mains.
CHARGE LEVEL INDICATORS
Charge Level Indicator
Charging LED will come on
Fully Charged LED will go out
• Run time from fully charged is up to 40 minutes.
• Charge time from empty is 4 hours.
• Note: To preserve the life of your batteries, let them run out every 6 months then fully
charge.
INSTRUCTIONS FOR USE
• Make sure your shaver is properly charged.
• Switch the shaver on by sliding up the on/o switch.
SHAVING
• Stretch the skin with your free hand so the hairs stand upright.
• Hold the shaving head so that the foils touch your face.
• Use short linear strokes.
To Next Page
Loading...
