Remington HC5400 - GETTING STARTED; Initial Appliance Charging; Charging Methods Overview

4
ENGLISH
C GETTING STARTED
, CHARGING YOUR APPLIANCE
• Beforeusingyourhairclipperforthersttime,chargefor16-20hours.
• Ensuretheproductisswitchedo.
• Connectthechargingadaptortotheproductandthentothemains.
• Iftheproductisnotgoingtobeusedforanextendedperiodtime(2–3
months), unplug it from the mains and store.
• Fullyrechargeyourproductwhenyouwouldliketouseitagain.
• Allow 16 hours for a full charge on the HC5400 and 4.5 hours on the HC5600 and
HC5800.
• Topreservethelifeofyourbatteries,letthemrunoutevery6monthsthen
recharge for 16-20 hours.
O This appliance should be charged by approved safety isolating adaptors
PA-3215E (for HC5400 EU version) or PA-3215U (for HC5400 UK version) with the
output capacity of 3.2V dc; 1500mA; and should be charged by approved safety
isolating adaptors
PA-4515E (for HC5600, HC5800 EU version) or PA-4515U (for HC5600,HC5800 UK
version) with the output capacity of 4.5V dc; 1500mA .
, QUICK CHARGE (HC5600 & HC5800)
Quick charge
time
10 minutes 30 minutes 1 hour 2 hours
Run time 5 minutes 15 minutes 30 minutes 40 minutes
, CHARGING VIA CHARGING STAND (HC5800)
• Ensuretheproductisswitchedo.
• Connectthechargingadaptortothechargingstandandthentothemains.
• Allow4.5hoursforafullcharge.
, CHARGING VIA STANDARD ELECTRICAL SOCKET
• Ensuretheproductisswitchedo.
• Connectthechargingadaptortotheproductandthentothemains.
• Allow 16 hours for a full charge on the HC5400 and 4.5 hours on the HC5600 and
HC5800 .