4
• Keep the power plug and cord away from heated surfaces.
• Do not leave the appliance unattended while plugged in.
• Do not place the appliance on any soft furnishings.
• Do not use attachments other than those we supply.
• Do not set the appliance down while still on.
• Do not twist or kink the cable, or wrap it round the appliance.
• Do not use the appliance if it is damaged or malfunctions.
• Check the cord regularly for any sign damage.
• This appliance is not intended for commercial or salon use.
PARTS
1. 1200W power handle
2. Mixed bristle brush
3. Cool tip
4. Heat selector switch (O, , C)
5. Speed selector switch
6. Inlet grille
7. Swivel cord
INSTRUCTIONS FOR USE
Prepare the hair for styling
• Wash and condition the hair as normal.
• Squeeze out excess moisture with a towel and comb through.
• For best results, dry your hair as normal until it is about 70-80% dry.
• Divide the hair into sections, style the lower layers rst.
To t the brush
• Fit the brush head before you turn on the appliance.
• Align the Usymbol on the brush with the mark on the body (g. A).
• Rotate the brush until the Lsymbol is aligned with the mark to secure (g. B).
Speed and temperature settings
• Plug your product into the mains power supply.
• To turn your air styler on, turn the speed selector switch to the 1 (low) or 2 (high)
setting.
• Your air styler has three temperature settings:
1. High (O): Thick and dicult to style hair
2. Hydracare ( ): Thin/ne, damaged or bleached hair
3. Cool (C): To set your style after styling
• Use the heat selector switch to select the appropriate temperature for your hair type.
ENGLISH
To Next Page
Loading...
