Remington Keratin Protect AS8810 - Instructions for Use; Securing Attachments

4
F INSTRUCTIONS FOR USE
• Wash and condition your hair as normal.
• Squeeze out excess moisture with a towel and comb through.
• Select your attachment before you turn on the appliance.
, To Secure Attachments to the Handle
• Align the arrow symbols (d) on the attachment locking ring with the centre
of the channels around the edge of the power handle locking ring and push
together.
• Turn the attachment locking ring firmly clockwise in the direction of the lock
arrow (+ L) to secure the power handle and the attachment together
• Dry length and roots partially prior to styling.
, Tip: for best results aim for 80% dry hair.
• Section the hair prior to styling. Style the lower layers first.
• Plug the product into the mains power supply
• Start styling on lower temperature first. Select the appropriate temperature
for your hair type using the temperature setting switch on the base of th
styler.
• To increase the temperature turn the temperature setting switch to position
‘1’ for low heat, ‘2’ for high heat and position ‘C’ for the cool setting.
, NOTE: The Brush attachments will only start rotating when a temperature
setting has been selected.
, Volume and Shape using the 40mm and 50mm brushes
• The 50mm mixed bristle brush adds volume and fullness and is ideal for mid
to longer hair.
• The 40mm soft bristle brush adds root volume, creates polished ends and
loose curls. Ideal for shorter, fine hair.
• To use the rotating function, press the right arrow (+) on the 2-way rotation
switch for the brush to rotate clockwise.
• Wrap the bottom of the hair around the brush
• Press the left arrow on the 2-way rotation switch (-) to wind hair around the
brush, stopping at the roots.
• Press the opposite arrow on the 2-way rotation switch to unwind.
• Let the attachments cool before removing.
ENGLISH