EasyManua.ls Logo

Remington Keratin Protect Rotating Air Styler AS8811 - Product Parts Identification; Using Your Rotating Air Styler; Securing Attachments to the Handle; Styling Volume and Shape

Remington Keratin Protect Rotating Air Styler AS8811
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Do not allow any part of the appliance touch the face, neck or scalp.
Keep the power plug and cord away from heated surfaces.
Do not use attachments other than those we supply.
Do not use the appliance if it is damaged or malfunctions.
Do not twist or kink the cable, or wrap it round the appliance. Check the cord regularly
for any sign damage.
This appliance is not intended for commercial or salon use.
WARNING: Contains traces of nuts.
PARTS
1. 1000 Watt power handle
2. 50mm thermal mixed bristle brush
3. 40mm thermal soft bristle brush
4. Root boost attachment
5. 2-way rotation switch
6. Temperature setting switch
7. Attachment locking ring
8. Power handle locking ring
9. Cool setting
10. Inlet grille
11. Hanging loop
12. 3m swivel cord
2 sectioning clips (not shown)
INSTRUCTIONS FOR USE
Wash and condition your hair as normal.
Squeeze out excess moisture with a towel and comb through.
Select your attachment before you turn on the appliance.
To Secure Attachments to the Handle
Align the arrow symbols (d) on the attachment locking ring with the centre of the
channels around the edge of the power handle locking ring and push together.
Turn the attachment locking ring rmly clockwise in the direction of the lock arrow (+
L) to secure the power handle and the attachment together.
Dry length and roots partially prior to styling.
Tip: for best results aim for 80% dry hair.
Section the hair prior to styling. Style the lower layers rst.
Plug the product into the mains power supply
Start styling on lower temperature rst. Select the appropriate temperature for your
hair type using the temperature setting switch on the base of th styler.
To increase the temperature turn the temperature setting switch to position ‘1’ for low
heat, ‘2’ for high heat and position ‘C’ for the cool setting.
NOTE: The Brush attachments will only start rotating when a temperature setting has
been selected.
Volume and Shape using the 40mm and 50mm brushes
The 50mm mixed bristle brush adds volume and fullness and is ideal for mid to longer
hair.
ENGLISH

Table of Contents

Related product manuals