EasyManua.ls Logo

Remington PG9100 - CHARGING YOUR APPLIANCE

Remington PG9100
176 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
PARTS
1. Precision T-blade
2. On/o switch
3. Charging indicator lights
4. Charger connector
5. Micro detail blade
6. Adjustable stubble comb (1.5 - 5mm)
7. Foil release buttons
8. Foil shaver
9. Release button
10. Fixed combs (3 - 25 mm)
Not shown:
Adaptor
Cleaning brush
Oil bottle
Storage pouch
CHARGING YOUR APPLIANCE
This appliance can be used ‘cordless’ by powering it from its internal rechargeable battery,
or ‘corded’ by connecting it to the charging adaptor and then the mains power supply.
Powering the appliance from the charging adaptor is useful if the rechargeable battery does
not have enough charge. Be aware however, that frequent use of the corded mode will
reduce the life of the rechargeable battery.
Before using your trimmer for the rst time, charge for 4 hours.
1. Ensure the product is switched o.
2. Connect the charging adaptor to the product and then to the mains.
3. When fully charged, unplug the charge adapter from the power outlet.
CHARGE REMAINING INDICATOR LIGHTS
Charge Level Indicator Light
Charging Blue LED will ash
Fully Charged Blue LED will light up continuously
Battery charge is low Red LED will ash
Your trimmer cannot be overcharged. However, if it is not going to be used for an
extended period of time (2-3 months), unplug it from the mains and store.
To preserve the life of your batteries, recharge them for 4 hours at least every 6 months.
On a full charge, your trimmer will run for up to 60 minutes of cordless usage.
CORDED USE
Connect the charging adaptor to the product then to the mains.
ATTACHMENTS
TO FIT AND REMOVE TBLADE ATTACHMENT FIG. A
Ensure that the device is switched o before tting or removing attachments.
ENGLISH

Table of Contents

Related product manuals