5
PARTS
1. On/o switch
2. Foil screens
3. Cutter assembly
4. Charging indicator lights
5. Hairpocket
6. Power port
7. Pop-up trimmer
8. Head release buttons
9. Head lock button
10. Stubble head guard
11. Beard trimmer attachment
12. Guide combs (x 6)
Not shown:
13. Adaptor
14. Cleaning brush
GETTING STARTED
CHARGING YOUR APPLIANCE
• It is recommended to fully charge your appliance before using it for the rst time.
• Ensure the product is switched o.
• The adaptor automatically adjusts to a main voltage between 100V and 240V.
• Connect the shaver to the adaptor and then to the mains.
CHARGING INDICATOR LIGHTS
Charge Level Lights
Charging
The lights will come on one after the other then go o in a
repeating pattern.
Fully Charged Both lights will come on for 5 minutes then go out.
Low charge/charging
required
The bottom light will ash rapidly.
Battery capacity 50%
or higher
Both lights will come on.
Battery capacity 50%
or lower
The bottom light will come on.
• Run time from fully charged is up to 50 mins.
• Charge time from empty is 2 hours.
• Note: To preserve the life of your batteries, let them run out every 6 months then fully
charge.
To Next Page
Loading...
