6. The adjustable taper control lever
allows you to gradually change
the closeness of your cut, either
with or without a trimming guide.
When the lever is fully forward the
blades will give you the closest cut.
Moving the lever gradually back-
ward increases the cut length.
Very short styles
1. Using the 1/2” (12mm) trimming
guide, hold the comb flat against
the head and
move the hair
clipper from
the back of
the neck to
the crown of
the head.
2. Cut in a similar
manner from
the side to the
top of the head. Then cut from the
front to the crown of the head.
3. If a “Flat Top” style is desired,
remove the trimming guide and
use the barber’s comb. Trim a
little at a time until a flat look is
achieved.
Trimming Beards &
Mustaches
1. Comb your beard in the direction
it grows.
2. Determine the
length you
want the beard
to remain,
and fit the
appropriate
trimming guide.
Remember
the 1/8”
(3mm) guide
will give you
the shortest beard while the 1”
(25mm) will give you the longest.
If you want a longer beard you can
use the styling comb as a trimming
guide.
3. Start trimming under your chin and
work toward your ear and beard
line. Cut in different directions for a
uniform trim.
4. Lightly stroke the edge of your
mustache in a downward
movement.
Maintenance
■Do not wrap the cord around the
appliance.
■This appliance does not contain
any user-serviceable parts. Bring
this appliance to an authorized
service representative for service.
8
To Next Page
Loading...
