EasyManua.ls Logo

Remington Wet 2 Straight S7300 - Dry Mode Operation; Temperature Management

Remington Wet 2 Straight S7300
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Ensure the vent holes are directed away from the face, neck and scalp.
When straightening wet hair you will hear a hissing sound and the unit will
steam. This is a good thing – it is the sound of excess water in your hair
evaporating and this is not harmful to the condition of your hair.
, Dry Mode – Use on Dry Hair
Before use, ensure the hair is clean, dry and tangle-free.
Start styling on lower temperatures rst. Select appropriate temperature for
you hair type using the controls on the side of the product. ‘+’ increases the
temperature ‘-‘ decreases the temperature.
, Recommended Temperatures:-
Temperature Hair Type
150°C - 170°C Fine
170°C - 200°C Medium
200°C - 230°C Thick
, Caution: the hottest temperatures should only be used by experienced
stylers.
The temperature bars and digital display will stop ashing when the desired
temperature is reached.
Working on one section at a time, run the straightener through the entire
length of the hair without stopping.
Only repeat twice per section to prevent damage to the hair.
After use, press and hold the o button for two seconds to turn o then
unplug the appliance.
Let the appliance cool down before cleaning and storing away.
, Temperature Lock Function
Set the desired temperature by pressing +/- buttons and lock the
temperature controls by pressing the ‘-‘ button for 2 seconds.
, Temperature Boost Function – Automatically Sets the Highest
Temperature.
Hold the ‘+’ button for 2 seconds and the temperature will boost to 230°C.
Please note, the highest temperature is not suitable for every hair type.
Please select a temperature depending on your hair texture.

Related product manuals