Driving
Once a cruising speed is stored and
the cruise control function is active,
you may lift your foot off the accelera-
tor pedal.
Important: you are never-
theless advised to keep
your feet close to the pedals
in order to react if neces-
sary.
The system is designed in such a
way that it is possible to detect a dif-
ference between the stored speed
and the speed shown on the instru-
ment panel.
Activating cruise control
At a steady speed (above 20 mph
(30 km/h) approximately) press switch
2
(+) or
3 (-): the speed is stored.
Cruise control activation is confirmed
when indicator light
6 is lit up in green
in addition to indicator light
7.
Switching on
Press switch 1 on the side showing
Ï.
Indicator light
7 on the instrument panel
lights up to indicate that the cruise con-
trol function is in operation.
When the function is activated, the
message ‘Cruise control’ appears on
the instrument panel accompanied by
dashes.
CRUISE CONTROL/SPEED LIMITER: cruise control function (2/4)
1
2 3
7
6
To Next Page
Loading...
