PASSENGER COMPARTMENT
Main fuse box
1. Be sure the ignition switch is in the OFF position.
2. Be sure the headlight switch is in the OFF posi-
tion.
3. Open the glove box.
4. Hold the glove box lid and pull it up to release the
hinges
jAlocated on the underside of the glove
box. As areference, align the glove box lid with
corner
jB.
5. Carefully release the left and right stoppers
jCand remove the glove box.
6. Locate the fuse that needs to be replaced.
7. Remove the fuse using the fuse puller
➀
.
8. If the fuse is open
➁
,replace it with anew fuse
➂
.
9. Install the glove box following removal steps in
opposite sequence.
If the new fuse also opens, after installing, have the
electrical system checked, and if necessary
repaired, by an approved dealer or qualified work-
shop.
Additional fuse box
NDI1686
NDI1689 NDI1688
NTI386
Maintenance and do-it-yourself 8-19
To Next Page
Loading...
