LIGHTING AND SIGNALS
2
mately 30 seconds and for approxi-
mately five seconds each time
switch
A
is pressed.
Examples of positions for adjust-
ing the control
A
according to the
load
0
Driver alone or with front pas-
senger
1
or
2
All seats occupied
2
or
3
Driver with passengers and
luggage (or load) reaching
the maximum permissible all-
up weight
4
Driver without passengers
and luggage (or load) reach-
ing the maximum permissible
all-up weight
The table below gives some exam-
ples. In all cases, adjust the control
A
according to the vehicle load so that
the road can be seen and other dri-
vers are not dazzled.
Getting to know your vehicle - 149
To Next Page
Loading...
