BREAKDOWN RECOVERY
6
Attach the positive cable
C
to termi-
nal
6
(+), then to terminal
10
(+) of the
battery supplying the current.
Attach the negative cable
D
to ter-
minal
11
(˗) of the battery supplying
the current and then to terminal
7
(˗).
Press the brake pedal and the Start
button or, depending on the vehicle,
turn on the ignition key. As soon as
the ignition is switched on, discon-
nect cables
C
and
D
in the reverse
order (
6
-
10
-
11
-
7
).
Each time you have used the cover
3
, check that the cover of terminal
13
is attached correctly to its tab
12
.
Ensure that there is no
contact between ca-
bles
C
and
D
and that
the positive cable
C
is
not in contact with any metallic
component in the vehicle sup-
plying the current.
Risk of injury and/or damage to
the vehicle.
Practical advice - 353
To Next Page
Loading...
