2
1
NU750_2_G2-FRA.qxd 25/07/05 9:45 Page 2.14
2.14
CRUISE CONTROL/SPEED LIMITER: cruising function (continued)
Switching on
Press the
ï
side of switch 1.
The indicator light on the instrument
panel comes on and the computer
enters Cruise control mode.
Activating cruise control
At a steady speed (above 18 mph (30
km/h)) and in the correct gear (for
vehicles with manual gearboxes),
press switch 2: the function is
activated.
Driving
When a cruising speed is stored you
may lift your foot off the accelerator
pedal.
The system is designed in such a
way that it is possible to detect a
difference between the
programmed speed and the
speed shown on the instrument
panel.
Varying the cruising speed
You may change the cruising speed
by pressing button 2 (consecutive
presses or pressing and holding):
- on the + side to increase the speed,
- on the – side to decrease the speed.
Important: you are
nevertheless advised to
keep your feet close to the
pedals in order to react if
necessary.
The cruise control
function does not affect
the braking system.
NU750_2_G2-ENG.qxp 9/7/2005 5:16 PM Page 2.14 (Black plate)
To Next Page
Loading...
