NU750_2_G1-FRA.qxd 28/07/05 13:22 Page 1.77
1.77
TRIP COMPUTER AND WARNING SYSTEM (continued)
Examples of display
selections by repeatedly Interpreting the display
pressing 3
h) Mileage before service/maintenance
This displays the distance left before the next service.
There are several scenarios:
- distance less than 1,200 miles (2,000 km) or next service date.
The
Êsymbol flashes (for 30 seconds if the display is not set to Mileage
before oil change, otherwise Mileage before oil change is displayed
continuously)
- distance is 0 miles or servicing date reached
The
Ê symbol flashes constantly whatever the information selected on
the display.
Resetting the display after service in accordance with the maintenance
schedule
The mileage before oil change/service must only be reset after a service in
conformance with the recommendations in the Warranty and Services
booklet.
If you decide to change the oil more frequently, do not reset this data each
time the oil is changed. This prevents the replacement interval from being
exceeded for other parts included in the maintenance schedule.
With the ignition switched on, select the mileage before oil change
information on the display.
Press button 3 for more than 10 seconds. The value on the display flashes
after 5 seconds and then is replaced by the reset mileage before service
value. This flashes for 2 seconds then stays continuously lit and is stored.
NU750_2_G1-ENG.qxp 9/9/2005 2:40 PM Page 1.77 (Black plate)
To Next Page
Loading...
