7
H
M
5
6
NU750_2_G1-FRA.qxd 28/07/05 13:22 Page 1.79
1.79
CLOCK (continued)
Clock 5
Setting the clock
With the ignition switched on and
display 5 set to total mileage
recorder and clock function, press
and hold button 6, to access Time
setting mode (clock flashing) then
release the button.
- Pressing and holding button 6
allows you to scroll through the
hours and minutes quickly;
- short presses on button 6 allow you
to set the time minute by minute.
Clock 7
Setting the clock
Press button:
H for hours
M for minutes
If the electrical supply is cut
(battery disconnected, broken
supply wire, etc.), the clock will
lose its time setting.
You should reset the time on the
clock.
For your safety, we recommend
that you do not adjust the clock
while driving.
NU750_2_G1-ENG.qxp 9/9/2005 2:40 PM Page 1.79 (Black plate)
To Next Page
Loading...
