CRUISE CONTROL
3
Driving - 123
|
The cruse control allows driving at
speeds above 30 Km/h (19 MPH)
(BR10 HS engine model) or 40 Km/h
(25 MPH) (HRA0DET engine model)
without keeping your foot on the accel-
erator pedal.
Depressing the clutch/brake pedal (for
manual transmission (MT) vehicle) will
cancel the cruise control and the set
speed indicator will turn off.
The cruise control switches are located
on the steering wheel and the right
side of the instrument panel
The cruise control func-
tion is no where linked to
the braking system
Please note that you
should keep your feet close to the
pedals inorder to react in an
emergency
Turning ON the Cruise control
Push the cruise control main switch
and the cruise control indicator will be
displayed on the speedometer A. Now
the vehicle is in cruise control inhibition
mode.
At the same time, set speed indicator,
will also be displayed on the
speedometer 1. When the cruise con-
trol main switch is off, function 1 and A
will be disabled.
Pressing the switch 4 will navigate the
display from the tachometer display to
the speedometer display in the meter
cluster with actual cruise speed set-
Pressing the switch 3 will set the
cruise speed and the same will be dis-
played in the speedometer
Pressing the RES+ switch 3 will in-
crease from the current set speed and
pressing the cruise control CANCEL
switch 2 will cancel the cruise speed.
When the cruising speed is cancelled,
the set speed indicator remains faded
out until the next cruise speed set by
the user.
Pressing again the RES+ switch 3 will
set to the previous cruise speed as it
will be in the memorized speed.
Setting the cruising speed
1. Accelerate to the desired speed
2. Push the switch - 4 and release it
3. The set speed is displayed in the ve-
hicle information display
4.Take your foot off the accelerator
pedal.The vehicle will maintain the set
speed.
To Next Page
Loading...
