Pull handle 1 located under the cover
and place each end of the cover in the
notch 2.
Pull handle 1 then lift it while unfolding
the luggage compartment cover.
Press the two ends 3 and move them
towards the centre of the luggage com-
partment cover, then tilt the cover.
Caution: the luggage compartment
cover is heavy.
To fit the luggage compartment cover,
proceed in reverse order.
it is easier to remove the lug-
gage compartment cover if the lower
section of the tailgate is closed.
Move the parcel shelf up (move-
ment A).
Remove the luggage compartment
cover and place it in position B.
Do not place any heavy or
hard objects on the luggage
cover. These may pose a
risk to the vehicle occu-
pants if the driver has to brake sud-
denly or if the vehicle is involved in
an accident.
To Next Page
Loading...
