bulbs
changing ......................................... (up to the end of the DU)
changing a bulb .................................... (up to the end of the DU)
lights:
side lights .........................................................(current page)
lights:
brake lights ......................................................(current page)
bulbs
changing ......................................... (up to the end of the DU)
lights:
direction indicators ...........................................(current page)
However, because bodywork compo-
nents need to be removed,
Open the tailgate then unclip cover 1
using a flat blade screwdriver or simi-
lar tool.
Remove the cover 2 then remove the
nut behind.
When changing the bulb, do
not touch the electrical cir-
cuit in which the new bulb is
to be inserted.
You could damage the light.
The bulbs are under pres-
sure and can break when
replaced.
Risk of injury.
Release the light unit by pulling it back-
wards.
Undo bulb holder 3, 4 or 5 a quarter of
a turn then replace the bulb.
Ensure that the lead is in place
before inserting the light unit.
3
4
5
To Next Page
Loading...
