Hold the buckle 4 and pull slowly on the
belt.
Place the upper section of the belt as
close to your shoulder as possible and
the lower section as close to your pelvis
as possible.
Click buckle 4 into the catch 5.
Hold the buckle 1 and pull slowly on the
belt.
Place the upper section of the belt as
close to your shoulder as possible and
the lower section as close to your pelvis
as possible.
Click buckle 1 into the catch 3.
Note: feed the side seat belts into the
clips 2 when they are not being used.
Check that the rear seat
belts are correctly posi-
tioned each time the rear
bench seat is moved.