bonnet...................................................(up to the end of the DU)
maintenance:
mechanical ......................................(up to the end of the DU)
4.2
ENG_UD15840_3
Capot moteur (X45 - H45 - Renault)ENG_NU_830-5_H45_Renault_4
Bonnet
Opening the bonnet
Lift the bonnet, release stay 4 from its
holder
5; for your safety, always fix it
in location
3.
To open, pull handle
1, located on the
left-hand side of the dashboard.
Unlocking the bonnet catch
To unlock, push tab 2 in the direc-
tion of arrow
A (the hook releases the
bonnet).
BONNET
Closing the bonnet
Check that nothing has been left in the
engine compartment.
To close the bonnet, replace stay
4
back into its holder
5, hold the bonnet in
the middle and lower it to 30 cm above
the closed position, then release it. It
will latch automatically under its own
weight.
Ensure that the bonnet is
properly locked.
Check that nothing is pre-
venting the catch from lock-
ing (gravel, cloth, etc.).
The engine may be hot
when carrying out opera-
tions in close proximity. In
addition, the engine cooling
fan can come on at any moment.
Risk of injury.
In the event of even a slight
impact involving the radia-
tor grille or bonnet, have
the bonnet lock checked by
an approved Dealer as soon as pos-
sible.
1
2
3
4
5
A
To Next Page
Loading...
