Renault Master Van 2004 - Page 97

AIR CONDITIONING (continued)
Passenger compartment isolation
Button D
Normal operation of the heating and
ventilation system is obtained using
external air.
Recirculation of air allows the
external atmosphere to be isolated
(driving in polluted areas).
Press button D to move to isolation
mode.
Air recirculation allows the desired
level of comfort to be achieved as
quickly as possible.
29
This starts or stops air recirculation.
Operation indicator light 2 switches
on when this function is in use. In
this position, air is taken from
inside the passenger compartment
and is recirculated without
admitting external air.
Prolonged use of this position
(recycled air) may mist up the
windows slightly or cause odours
due to the air not being renewed.
It is therefore advisable to return to
normal operation (external air) by
pressing button D when you have
passed through the polluted area.
Adjusting the air temperature
Move control C,
To the right: Maximum possible
temperature.
To the left: Minimum possible
temperature.
Adjusting the amount of air
blown into the Passenger
compartment
Move control E from 0 to 4.
Passenger compartment ventilation
is by “blown air’. The blower
determines how much air enters but
vehicle speed also has some
influence on this.
The further the control is positioned
to the right, the greater the quantity
of air blown into the passenger
compartment.
Note: using the demisting
position prevents use of the
recirculation function and
triggers the air conditioning.