STARTING, STOPPING THE ENGINE
3
140 - Driving
Ignitionstarterswitchonavehi
cle with card
The card must be in the detection zone
1
.
To start:
– in P position, press the brake pedal
and button
2
.
The READY message appears on the
instrument panel, accompanied by a
beep.
Themessagedisappearswhentheve
hicle speed is above approximately 3
mph (5 km/h).
Releasethebrakepedaloncetheen
gine has started;
Special features
– If one of the conditions required for
starting is not met, the "Press brake +
START" or "Press clutch + START" or
"Set gearbox to P" message appears
on the instrument panel;
– in some cases it is necessary to
movethesteeringwheelwhilepress
ing the start button
2
to help unlock
thesteeringcolumn–inthiscase
theTurnsteeringwheel+START"
message will inform you.
Driver's responsibility
when parking or stop
ping the vehicle
Never leave an animal,
childoradultwhoisnotselfsuffi
cient alone in your vehicle, even
for a short time.
Theymayposearisktothem
selves or to others by starting the
engine, activating equipment such
as the electric windows or locking
the doors.
Also, in hot and/or sunny weather,
pleaserememberthatthetemper
atureinsidethepassengercom
partment increases very quickly.
RISK OF DEATH OR SERIOUS
INJURY.