SPEED LIMITER
3
Driving - 227
Press switch
1
asmanytimesasnec
essary to select the speed limiter
A
.
The
7
warning light appears in grey.
The"Speedlimiterready:SETtoacti
vate"messageappearsontheinstru
ment panel accompanied by dashes to
indicate that the speed limiter function
is activated and waiting for a limit
speed to be stored.
Note: depending on the vehicle, when
the vehicle is started, the speed limiter
is automatically selected if the function
A
or OFF was selected the last time
the vehicle was stopped.
To store the current speed, press the
4
switch (SET/-) or the
5
switch (SET/+):
the limit speed replaces the dashes
and, depending on the vehicle, the
7
warning light appears in white.
The minimum stored speed is 19 mph
(30 km/h).
Varying the limit speed
The limit speed may be changed by
pressing repeatedly or holding down:
– switch
5
(SET/+) to increase the
speed;
– switch
4
(SET/-) to reduce speed.
Automatic speed limiter with
speed limit sign recognition
(depending on subscription: without a
subscriptionthisfunctioncannotbeac
tivated. To manage your subscription,
see the multimedia instructions.)
Usingthecamera,the"Roadsignde
tection" function 🡺204 and the map
associated with the subscription, the
system automatically limits the vehicle
speed when a speed limit road sign is
identified and passed.
Activation/deactivation
From the multimedia screen, in the
"Vehicle" world, select "Driving aids".
Then, from the "Speed adaptation"
menuviewthe"Adaptivecruisecon
trol" field and select "To speed limits".
Note: you can also activate/deactivate
by pressing and holding the contextual
button
6
.
Exceeding the limit speed
It is possible to exceed the limit speed
at any moment. To do this, press the
accelerator pedal firmly down beyond
the point of resistance.
While the speed is being exceeded,
thespeedlimiterflashesredonthein
strumentpanel.Then,releasetheac
celeratorpedal:thespeedlimiterfunc
tion will return as soon as you reach a
speed lower than the memorised
speed.