Renault SYMBIOZ 2024 - Activating Cruise Control

ADAPTIVE CRUISE CONTROL
3
236 - Driving
4. Safe distance settings
5. Recall the stored cruising speed
(RES).
6. Activates, stores or reduces the
cruising speed or stores the current
speed (SET/-).
7. Switch to activate and increase
cruisingspeedortorecallthememo
rised cruising speed (SET/+).
8. Puts the function on standby and
stores the limited speed (0).
9. Pop-up button (depending on the
vehicle): adapts the speed setpoint to
detected speed limits 🡺204
Depending on the vehicle,
you can link the adaptive
cruise control function to
the "Road sign detection" function
🡺204 by pressing the switch 7 .
Whenthe"OFF"modeisselectedbe
fore the ignition is switched off, the
"Speedlimiter"functionwillbeactivat
ed by default the next time the engine
is started.
Displays
10. Adaptive cruise control warning
light.
11. Vehicle in front.
12. Stored safe distance
13. Stored cruising speed.
Important: you should
keep your feet near the
pedals at all times to
prepare for any event.
Switching on
Press switch 3 asmanytimesasnec
essarytoselectadaptivecruisecon
trol.
The warning light appears in
grey and the "Adaptive cruise control
ready:SETtoactivate"messageap
pearsontheinstrumentpanelaccom
panied by dashes to indicate that the
function is activated and waiting to
store a cruising speed.
This function cannot be activated
when:
– the parking brake is applied;
– the driver's seat belt is not fastened;
– one or more doors are incorrectly
closed;
– the "Hands-free parking" function is
already activated.
The "Adaptive Cruise Ctl unavailable"
messageisdisplayedontheinstru
ment panel.
Activating cruise control
Whenthevehicleisstationaryormov
ing at a steady speed, press switch 7
(SET/+) or switch 6 (SET/-) to activate
the function and store the current
speed.
The minimum cruising speed is 19
mph (30 km/h).