INSTALLATION AND USE OF ACCESSORIES
6
Practical advice - 349
Electrical and electronic accessories
Before installing this type of accessory (particularly for transmitters/receivers: frequency bandwidth, power level,
position of the aerial, etc.), make sure it is compatible with your vehicle. Contact an approved dealer.
Before connecting an accessory to a socket, ensure that it does not exceed the maximum power authorised for
the socket 🡺293, 🡺299.
Fire hazard.
Noworkmaybecarriedoutonthevehicle’selectricaland/orelectroniccircuits,exceptbyaqualifiedprofessional.Infact,
an incorrect connection and/or the installation of electrical/electronic accessories not approved by the manufacturer could
lead to:
– damage to the electrical and/or electronic equipment;
– damage to the components connected to it;
– the collection and use of vehicle data;
– an invasion of privacy (modification, deletion or unwarranted access to personal data);
– cancellation of the authorisation for entry into service.
Risk of serious accidents.
Risk of invasion of privacy.
If you have electrical equipment fitted in future, make sure that you obtain information on the rating and position of this
fuse.
Using the diagnostic socket
Theuseofelectronicaccessoriesonthediagnosticsocketmaycauseseriousdisturbancetothevehicle'selectronicsys
tems. For your safety, we recommend that you only use electronic accessories approved by the manufacturer: consult an
approved dealer.
Risk of serious accidents
Fitting aftermarket accessories
If you wish to install accessories on the vehicle: consult an approved dealer. Also, to ensure the correct operation of your
vehicle, and to avoid any risk to your safety, we recommend that you use only accessories specifically designed for your
vehicle, which are the only accessories for which the manufacturer will provide a warranty.
If you are using an anti-theft device, only attach it to the brake pedal.
Driver obstruction
To Next Page
Loading...
