1.100
ENG_UD57721_1
Éclairages et signalisations extérieurs (X10 - Renault)
“See-me-home lighting”
function
This function enables you to briefly
switch on the side lights and dipped
beam headlights (e.g. to provide light
when opening a gate).
With the engine lights switched off,
the 2 ring in AUTO, pull the lever 1 to-
wards you: the side lights and dipped
beam headlights will switch on for ap-
proximately 30 seconds along with the
š and k on the instrument
panel.
To increase this duration, you may pull
the stalk up to four times (total time re-
stricted to approximately two minutes).
On the instrument panel, the message
“lighting on _ _ _” followed by the re-
maining time will appear as confirma-
tion. You can then lock your vehicle.
To switch off the lights before they go
out automatically, turn ring 2 to any po-
sition, then return it to position AUTO.
EXTERIOR LIGHTING AND SIGNALS (5/6)
1
2
To Next Page
Loading...
