MAINTENANCE
Keep the slide-out mechanisms clean. Road grime such as dirt, salt, ice, can build up on the mechanism impairing
operation. You can clean them by using a mild soap and water solution.
Avoid damage to the slide out mechanism. Before you slide the room, make sure the leveling jacks are in place to
avoid improper weight distribution or leaning.
To avoid damage to the slide out be sure the unit can slide freely, and the area is clear of any obstructions.
Your slides are equipped with rubber wiper blades located at the top, along the sides, and across the bottom of the
slide out opening that will assist in wiping off debris when the slide out is being operated.
Periodically check the
wiper seals to ensure they are free of debris.
To Next Page
Loading...