Need help?Do you have a question about the Renke RS-ECTH-N01 and is the answer not in the manual?
General| Output Signal | RS485 |
|---|---|
| Temperature Measuring Range | -40°C to 80°C |
| Temperature Measurement Accuracy | ±0.5°C |
| Humidity Measuring Range | 0%RH~100%RH |
| Humidity Measurement Accuracy | ±3% RH |
| Operating Humidity | 0% to 95% RH (non-condensing) |
| Storage Temperature | -40°C to 85°C |
Details the sensor's high performance, high sensitivity, and role in observing soil conditions.
Lists applications like soil moisture monitoring, irrigation, and agriculture.
Details electrical, environmental, and measurement specifications like power, temp, and accuracy.
Explains the product model naming convention and its components.
Highlights key attributes: combined parameters, material, sealing, and probe design.
Guides on how to perform quick soil measurements, emphasizing proper insertion.
Details the procedure for long-term buried sensor installation and measurement.
Provides important considerations for sensor measurement and protection.
Lists essential items to check before proceeding with sensor installation.
Explains power input and 485 signal line wiring considerations.
Provides a wiring diagram and color code for connecting the sensor to power and data.
Guides on selecting and opening the necessary configuration software.
Details steps for selecting COM port and connecting the device for configuration.
Defines communication settings like data bit, parity, stop bit, and baud rate.
Explains the Modbus-RTU frame structure for host inquiry and slave response.
Lists register addresses, parameter types, and descriptions for the sensor's data registers.
Provides examples of reading temperature and humidity data via the communication protocol.
Outlines common reasons for connection failures and troubleshooting steps.
To Next Page