Need help?Do you have a question about the Renkus-Heinz ICL-R and is the answer not in the manual?
Explains warning symbols used in the manual for safety.
Introduces the RHAON system, its capabilities, and organizational structure.
Outlines the preparation, connect, control, and supervise stages of RHAON setup.
Details linking software icons, CobraNet routing, and input assignments.
Covers setting up and optimizing the array's beam patterns for coverage.
Explains EQ, compressor, delay, and priority override settings for audio control.
Describes controlling individual loudspeakers and managing groups.
Details status indicators, driver monitoring, and fault detection.
Covers event logging, notification, and access control features.
Provides instructions for wall mounting and suspension.
Explains Ethernet, IP addressing, and common network issues.
Guides on updating RHAON software and device firmware.
General| Type | Digitally Steerable Line Array |
|---|---|
| Horizontal Beamwidth | 150° |
| Impedance | 8 Ohms |
| Amplification | Internal Class D |
| Vertical Beamwidth | 10° |
| Networking | RHAON II |
| Enclosure Material | Plywood |
| Weight | 24.1 kg (53 lb) |
To Next Page
