Reolink Argus PT Ultra User Manual

English English3 4
OFF
ON
POWER
RST
MicroSD
OFF
ON
POWER
RST
MicroSD
OFF
ON
POWER
RST
MicroSD
Set up the CameraCamera Introduction
Set up the Camera Using a Smartphone
Step 1 Scan to download the Reolink App from the App Store or Google Play store.
Step 2 Turn on the power switch to power on the camera.
Dierent states of the status LED:
Red Light: WiFi connection failed Blinking: Standby status
Blue Light: WiFi connection succeeded On: Working status
OFF
ON
POWER
POWER
OFF
ON
POWER
Lens
Power Switch
IRLEDs
Antenna
Spotlight
Charging Port
Daylight Sensor
Battery Status LED
Built-in PIR Sensor
Built-in Mic
StatusLED
Speaker
Reset Hole
Micro SD Card Slot
* Press for more than ve seconds to
restore the device to default settings.
* Rotate the camera’s lens to nd the
reset hole and the SD card slot.
1
11
2
12
3
13
4
14
5
6
7
8
9
10
4
8
10
9
3
2
1
12
11
5 7
13
14
6

Reolink Argus PT Ultra Specifications

General

Lens	f=2.8mm, F=2.0
Video Resolution	4K (3840x2160)
Pan/Tilt Angle	Pan: 355°, Tilt: 140°
Digital Zoom	16x
Infrared Night Vision	Up to 33ft (10m)
Wireless Standard	Wi-Fi 802.11 b/g/n
Operating Frequency	2.4 GHz
Wireless Security	WPA/WPA2
Storage	microSD card (up to 128GB)
Weather Resistance	IP65
Motion Detection	PIR motion sensor