Reolink Duo Floodlight PoE - Connection Diagram; Set up the Camera

7 8
RST RST
RST
2
1
RST
RST
LED L AN DC
LED LAN DC
Connection Diagram
Beforeinitialsetup,followthestepsbelowtoconnectyourcamera.
1.ConnectthecameratoaLANportonyourrouterwithanEthernetcable.
2.Usethepoweradaptertopoweronthecamera.
NOTE:TheconnectiondiagramtakestheWiFicameraasanexampleandalsoapplyto
thePoEcamera.ForPoECamera,pleasepowerthecamerawithaPoESwitch/Injector/
ReolinkPoENVR,oraDC12Vpoweradapter.
Camera
PowerCable
Router
NetworkCable
Power Adapter
Set up the Camera
• On Smartphone
ScantodownloadtheReolinkApp.
             
DownloadandLaunchtheReolinkApporClientsoftware,andfollowtheonscreen
instructionstonishinitialsetup.
•WhensettinguptheWiFicamera,youneedtofollowtheonscreeninstructionstonishthe
WiFiconguration
• On PC
Download path of the Reolink Client: Support > App & Client.NOTE:
rst.
•IfyouareconnectingthePoEcameratoaReolinkPoENVR,pleasesetupthecameravia
theNVRinterface.
English English