ResMed Astral 100 Series User Manual

Accessories
44
Astral Carry Bag
The Astral device should always be packed in its Carry Bag when not in use to prevent damage to the
device.
WARNING
The Astral should not be operated while in the Carry Bag. To ventilate while travelling, use the
Astral Mobility bag or SlimFit mobility bag.
To use the Carry Bag
1. Prior to placing the device in the Carry Bag, remove:
- the power connection from the rear of the device
- all patient circuit components
- all accessories, including Remote Alarm and oximeter
- the USB Stick.
2. Place the Astral device carefully into the Carry Bag, ensuring the handle is at the top and the screen
faces the printed image on the bag.
3. Secure the Astral device in place by using the Velcro strap. (To ensure the most secure position,
thread the Velcro strap through the handle and attach.)
4. Place the Power Supply unit and any heavy components in the side zippered pocket.
5. Ensure all zippers are completely closed and the device secure before lifting the Carry Bag.
CAUTION
Do not place any heavy or bulky objects in the zippered pocket on the inside front of the bag. This
could result in damage to the LCD Touch screen.

ResMed Astral 100 Series Specifications

General

Device Type	Portable Ventilator
Max Pressure	60 cm H2O
Operating Temperature	5°C to 40°C (41°F to 104°F)
Operating Humidity	10% to 95% relative humidity, non-condensing
Display	Color LCD touchscreen
Modes of Ventilation	CPAP
Data Storage	SD card
Alarms	Adjustable visual and audible alarms
Tidal Volume	50 to 2500 mL
Inspiratory Time	0.3 – 5 seconds
FiO2 Monitoring	Yes
Power Supply	AC 100 – 240V, 50/60 Hz
Oxygen Compatibility	Yes
Pressure Range	4 – 60 cm H2O
PEEP	4 to 25 cm H2O