Resonessence CONCERO - Page 2

2
USB
Connect to an active
USB Host to enable
USB to Analog and
USB to S/PDIF
Bridge mode.
Connect to a
power-only USB
port to enable
S/PDIF DAC mode.
Analog Outputs
Connect to the
pre-amplifier
inputs of your
existing audio
system.
These outputs
produce
1.2Vrms.
S/PDIF I/O
In USB DAC or
USB to S/PDIF
Bridge mode,
connect to your
S/PDIF enabled
amplifier input.
In S/PDIF DAC
mode connect to
your S/PDIF data
source.