2. If the hearing aids do not respond to the device because of
an unusual field disturbance, move away from the dis-
turbing field.
3. Do not use this device in locations where it is forbidden to
use electronic devices.
4. Your hearing aids and this device were given a unique com-
munication code during the fitting. This ensures that the
device will not affect hearing aids worn by others.
5. High-powered electronic equipment, larger electronic
installations and metallic structures may significantly
reduce the operating range.
6. Opening or modifying the remote control might damage it.
If problems occur which cannot be resolved by following
the remedy guidelines in the troubleshooting section of this
user guide, consult your hearing care professional.
7. The remote control may only be repaired by an authorized
service center.
21
To Next Page
Loading...
