16
2) Device name: Click [ ] next to "Multifunctional Alarm Host/ WIFI Alarm
System" to check the device name or rename the device;
3) Device location: Click [ ] next to "Multifunctional Alarm Host/ WIFI Alarm
System" and nd the "Location" setting item. After entering, you can check the
device location or re-conrm the installation location of the device;
4) Device information: You can view viual ID, IP address, Mac address, device
time zone, signal strength and other information;
5) Oine reminder: A reminder is issued when the device is disconnected for
more than 30 minutes, and a reminder is issued when a low-power device is
disconnected for more than 8 hours;
6) Shared device: Share the device with users who need to view the device;
7) Frequently Asked Questions and Feedback: View solutions to some common
problems and provide feedback on unsolved problems;
8) Add to home screen: Click this option to generate a "desktop shocut" on
the phone's home inteace;
9) Check device network: Click this option to check the connection between
mobile phones and other terminal devices and the WIFI network;
10) Device upgrade: Click this option to check the rmware version of the
device;
11) Remove the device: If you do not need to view the device, you can remove
the device;
3.6.7 “Scene” function operation instructions
1) Click the "Scene" button, then click "Create Sma Scene" on the "Automation"
page to enter scene creation; under the create scene function, users can refer
to the APP options and operate step by step until the creation of the
corresponding scene is completed, for example key execution, weather
changes, changing arming modes, etc.; (Note: This product currently only
suppos button calls, other functions such as weather changes, arming modes,
etc. require the purchase of additional accessories)
After the scene setting is completed, you need to name the newly created
scene, click Save, and then exit.
Unauthorized modication and adjustment
Changes or modications not expressly approved by the pay responsible for
compliance may void the user’s authority granted by the local government
radio management depaments to operate this radio and should not be made.
To comply with the corresponding requirements, transmitter adjustments
should be made only by or under the supeision of a person ceied as
technically qualied to peorm transmitter maintenance and repairs in the
private land mobile and xed seices as ceied by an organization
representative of the user of those seices. Replacement of any transmitter
component (cstal, semiconductor, etc.) not authorized by the local
government radio management depaments equipment authorization for this
radio could violate the rules.
FCC
This device complies with pa 15 of the FCC Rules. Operation is subject to the
following two conditions: (Other devices are applicable)
(1) This device may not cause harmful inteerence.
(2) This device must accept any inteerence received, including inteerence
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device. These limits are designed to provide reasonable
protection against harmful inteerence in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
inteerence to radio communications. However, there is no guarantee that
inteerence will not occur in a paicular installation. If this equipment does
cause harmful inteerence to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to t
to correct the inteerence by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
IC
Licence-exempt radio apparatus
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause inteerence.
(2) This device must accept any inteerence, including inteerence that may
cause undesired operation of the device.
CE
•(Simple EU declaration of conformity) HENAN ESHOW ELECTRONIC
COMMERCE CO., LTD. declares that the radio equipment type is in compliance
with the essential requirements and other relevant provisions of RED Directive
2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive
2012/19/EU; the full text of the EU declaration of conformity is available at the
following internet address: www.retekess.com.
Disposal
The crossed-out wheeled-bin symbol on your product,
literature, or packaging reminds you that all electrical
and electronic products, batteries, or accumulators must
be taken to designated collection locations at the end
of their working life. Do not dispose of these products
as unsoed municipal waste. Dispose of them according to the laws and rules
in your area.Iug
RF Safety
This two-way radio uses electromagnetic energy in the radio frequency (RF)
spectrum to provide communications between two or more users over a
distance. RF energy, which when used improperly, can cause biological
damage. Please refer to the following websites for more information on what
RF energy exposure is and how to control your exposure to assure compliance
with established RF exposure limits: http://www.who.int/en/
Transmitting necessa information or less, is impoant because the radio
generates measurable RF energy exposure only when transmitting in terms of
measuring for standards compliance. For users who wish to fuher reduce
their exposure, some eective measures to reduce RF exposure include:
•Reduce the amount of time spent using your wireless device.
•Increase the distance between wireless devices and your body.
•This radio is designed for and classied as “General population/uncontrolled
use”. General population/uncontrolled environments are dened as locations
where there is exposure of individuals who have no knowledge or control of
RF exposure level.
Electromagnetic Inteerence/Compatibility
Nearly eve electronic device is susceptible to electromagnetic inteerence
(EMI) if inadequately shielded, designed, or otherwise congured for
electromagnetic compatibility. During transmissions, your radio generates RF
energy that can possibly cause inteerence with other devices or systems. To
avoid such inteerence, turn o the radio in areas where signs are posted to
do so, such as hospitals or healthcare facilities.
Protect your hearing
• Use the lowest volume necessa to do your job. Turn up
the volume only if you are in noisy surroundings.
CAUTION: Exposure to loud noises from any source for
extended periods of time may temporarily or permanently
aect your hearing. The louder the radio's volume, the less time is required
before your hearing could be aected. Hearing damage from loud noise is
sometimes undetectable at rst and can have a cumulative eect.
10.1 Batteries Safety
•In the event of a batte leaking, do not allow the liquid to come into
contact with the skin or eyes. If contact has been made, wash the aected
area with copious amounts of water and seek medical advice immediately.
•If a radio or a batte has been submerged in water, please d and clean it
before use. Do not d the radio or batte with an appliance or heat source,
such as a hair der or microwave oven. If the radio has been submersed in a
corrosive substance (e.g. saltwater), rinse the radio and batte in fresh water,
then d them.
•Turn o your radio before removing or installing a batte. Store spare
batteries securely. Dispose of used batteries immediately and safely.
•The batte supply terminals are not to be sho-circuit.
•Batteries should be removed from the appliance when not being used for
long periods of time (months). The batteries should be enclosed in special
protective packaging (such as sealed plastic bags or variants) which should be
retained to protect them from condensation during the time they are warming
to ambient temperature.
•Exhausted batteries are to be removed from the equipment.
•Do not dismantle, open or shred batteries. Batteries should be dismantled
only by trained people.
•Disposal of a batte into re, or a hot oven, or mechanically crushing or
cutting of a batte, that can result in explosion;
•Batteries shall be charged at 10℃~40℃ environment temperature specied.
If the environment temperature is lower than 0℃, the charge shall be
prohibited.
•Rechargeable batteries are only to be charged by adults or by children at
least 8 years old under adult supeision.
•Unplug the charger from the AC outlet before attempting any maintenance
or cleaning.
•NEVER charge a batte unless it is a rechargeable batte.
•Do not mix alkaline, standard (carbon-zinc) or rechargeable (Ni-Cd; Ni-MH)
batteries.
•Batteries must be inseed with the correct polarity. Replacement of a
batte with an incorrect type can defeat the safeguard. There will be a risk of
re or explosion if a batte is replaced by an incorrect type.
•Do not mix batteries of dierent manufacture, capacity, size, or type within a
device.
•If the batte compament (if applicable) does not close securely, stop
using the product and keep it away from children;
•Never put batteries in your mouth. Swallowing may lead to serious inju or
death. If you think batteries might have been swallowed or otherwise placed
inside any pa of the body, please seek immediate medical attention and
contact the local poison control center.;
Unfounately, it is not obvious when a small-size batte, such as a button or
coin batte, is stuck in a children’s esophagus (food pipe). There are no
specic symptoms associated with this. The child might:
•Cough, gag or drool a lot;
•Appear to have a stomach upset or a virus;
•Be sick;
•Point to their throats or stomachs;
•Have pain in their abdomen, chest, or throat;
•Be tired or lethargic;
•Be quieter or more clingy than usual or otherwise “ not themselves”;
•Lose their appetite or have a reduced appetite;
•Not want to eat solid food/ be unable to eat solid food.
These sos of symptoms va or uctuate with the pain increasing or
subsiding. A specic symptom of button and coin batte ingestion is vomiting
fresh (bright red) blood. If the child does this, seek immediate medical help.
The lack of clear symptoms is why it is impoant to be vigilant with button or
coin batteries and the products that contain them in the home.
WARINING:CHOKING HAZARD-Small Pas. Not suitable for
children under 3 years old.
Adapter
The power delivered by the charger must be between min [4.2] Watts and max
[5] Watts required by the radio equipment in order to achieve the maximum
charging speed.
Authorized Accessories List
•Contact Retekess for assistance regarding repairs and seice
•For a list of Retekess-approved accessories for your radio model, visit the
website http://www.retekess.com
To Next Page
Loading...