Retevis RB66 - IC Requirements

This radio is designed for and classified as "General population/
uncontrolled Use"
DO NOT operate the radio without a proper antenna attached, as this
may damage the radio and may also cause you to exceed RF exposure
limits. A proper antenna is the antenna supplied with this radio by the
manufacturer or an antenna specifically authorized by the manufacturer
for use with this radio.
DO NOT transmit for more than 50% of total radio use time, more than
50% of the time can cause RF exposure compliance requirements to be
exceeded.
This transmitter may operate with the antenna(s) documented in this
filing in Push-to-Talk and body-worn configurations. RF exposure
compliance is limited to the specific belt-clip and accessory
configurations as documented in this filing and the separation distance
between user and the device or its antenna shall be at least 2.5 cm.
•Disposal
The crossed-out wheeled-bin symbol on your product, literature, or
packaging reminds you that all electrical and electronic products,
batteries, and accumulators (rechargeable batteries) must be taken
to designated collection locations at the end of their working life.
Do not dispose of these products as unsorted municipal waste.
Dispose of them according to the laws in your area.
IC Requirements:
This product meets the applicable Innovation, Science and Economic
Development Canada technical specifications.
Le présent produit est conforme aux spécifications techniques applicables
d'Innovation, Sciences et Développement économique Canada.
This apparatus is subject to Canada ICES-003 (B) / NMB-003 (B)
Electromagnetic Interference/Compatibility
NOTE: Nearly every electronic device is susceptible to electromagnetic
interference (EMI) if inadequately shielded, designed, or otherwise
configured for electromagnetic compatibility.
09