20
1. To be able to start the trike, gear "P" must be engaged.
2. Insert the key into the ignition lock and turn it to the right until it resists.
3. Now briefly press the start button on the right-hand switch combination; the ignition is activated, and the LCD instrument panel switches
on with a short delay. (The ignition of the vehicle is now switched on!).
4. The LCD display is activated, now the trike is ready to start the engine.
5. Make sure the “kill-switch” is in the "ON" position.
6. Depress the brake pedal hard - when the brake pedal is depressed, press the start button briefly - the engine will start!
7. Now the desired gear can be selected.
Switching on the ignition and starting the engine - standard key variant with LCD display
T
Functions and settings
To Next Page
Loading...
