Synchronous Motors MKD Handling 14-3
DOK-MOTOR*-MKD*******-PR07-EN-P Version7.0 19.05.2004
14.4 Storage
WARNING
Damage to motor and loss of warranty possible!
Any improper storage may cause damage to the motor.
In addition, any warranty claim will expire.
⇒ For that reason, please observe the following
instructions.
The following conditions must be kept during storage:
• Permissible range of temperature: -20° C up to +80 °C.
• Store motors at dry places which are free from dust and vibrations.
• Store motors horizontally.
• Do not remove the plastic protective sleeve on the drive shaft. It
protects the shaft from moisture and mechanical damage.
14.5 Transport and Handling
WARNING
Damage to motor and loss of warranty possible!
Improper transport and handling may cause damage to
the motor. In addition, any warranty claim will expire.
⇒ For that reason, please observe the following
instructions.
The following conditions must be kept during transport and handling:
• Use the appropriate means for transport. Take the weight of the
components into consideration (weights are specified in the chapters
pertaining to the various motors, in the sections on technical data
and/or on the type label of the motor).
• Provide for shock absorption, if strong vibrations may occur during
transport. Please also observe the limits specified in Chapter 12.5,
“Maximum Vibration and Shock Loads”.
• Transport only in horizontal position.
• Use cranes with lifting sling belts to lift the motors.
• Avoid damage to the motor flange and the drive shaft.
• Avoid impacts on the drive shaft.
• Remove the plastic protective sleeve from the drive shaft only shortly
before mounting the motors.
mhd_heben.fh7
Fig. 14-5: Lifting and transporting the motors by means of lifting sling belts
To Next Page
Loading...
Need help?
General
