Reyee RG-E5 User Manual

Router
Item
Quantity
Power Adapter
Warranty Card
User Manual
Ethernet Cable
Regulatory Compliance Manual
Packing List
Product Appearance
Reset Button
Power 4 LAN Ports WAN Port
WAN Port(Yellow)
Power Supply
ISP Modem
1
1
1
1
1
1
Status
Description
Reyee Mesh Indicator
The device is working normally and can
access to the Internet.
The device is starting up or restoring the
factory settings.
Solid blue
Blinking blue
System Status Indicator
Scenario 1: Configure one single router to access the Internet
Go to your phone settings page and choose Wi-Fi network @Reyee-sXXXX,
and the configuration page will appear automatically. Or you can access
192.168.110.1 via the browser.
①
The router automatically detects the type of Internet connection. Please
configure the network parameters accordingly.
The Wi-Fi configuration takes effect in 2 to 3 minutes. Connect to
the new Wi-Fi name (SSID) after it appears in the Wi-Fi list for
Internet access.
XXXX is the last 4 digits of
the MAC address on the
label of router.
Access the Internet by App
①
Download the Reyee Router App
②
Create an account by one click
③
Tap Add Router, and follow the guide of configuration
②
③
Login/Register
Add Router
Scan to Download Reyee Router App
Reyee RG-E5 Mesh Router
@Reyee-sXXXX
1. Power on and connect Ethernet Cable.
Access the Internet by Web
2. Configure the router.
The router will complete startup in 2 to 3 minutes after being powered on. Wait until
the system status indicator turns solid on and the SSID is broadcast (default SSID:
@Reyee-sXXXX).
Reyee Mesh Indicator
System Status Indicator
Status Description
Blinking green
The device is being paired.
The Mesh network signal is strong.
The Mesh network signal is weak.
The Mesh network is disconnected or
not set up.
Solid green
Solid orange
Solid red

Reyee RG-E5 Specifications

General

Wi-Fi Standard	Wi-Fi 6 (802.11ax)
Frequency Bands	2.4 GHz, 5 GHz
MU-MIMO	Yes
Beamforming	Yes
Parental Controls	Yes
WAN Ports	1 WAN port
LAN Ports	4 LAN ports
Antenna	4 external antennas
Security	WPA3

Summary

Product Appearance and Indicators

Reyee Mesh Indicator

Explains the status and meaning of the Reyee Mesh Indicator lights on the router.

System Status Indicator

Explains the status and meaning of the System Status Indicator lights on the router.

Single Router Internet Setup

Web-Based Configuration

Guide for accessing the router via web browser for internet connection configuration.

App-Based Configuration

Guide for downloading and using the Reyee Router App for internet connection configuration.

Mesh Network Setup

Primary Router Internet Setup

Connect the primary router to the internet, referencing the single router setup guide.

Secondary Router Pairing and Placement

Place the secondary router near the primary and press the mesh button for pairing.

Secondary Router Integration and Optimization

Place the secondary router in a weak signal area and optimize mesh network coverage.

Frequently Asked Questions

Forgetting Management Password

Steps to recover or reset the management password if forgotten.

Factory Reset Procedure

Guide on how to perform a factory reset on the router using the reset button.

Regulatory Compliance and Warnings

FCC Compliance Statement

Details compliance with FCC rules regarding interference and operation.

RF Exposure Information

Information on FCC RF exposure limits and warnings for safe operation.

Innovation, Science and Economic Development Canada Statement

Details compliance with Industry Canada's license-exempt RSSs and operational conditions.