RF Technologies 9450 User Manual

28 pages

Questions and Answers:

D
Dr. Tara RiddleAug 3, 2025
What to do if Baby Check and Infant Transmitter mismatch with RF Technologies 9450 Transmitter?
- D
  Debra WoodAug 3, 2025
  If a Baby Check and Infant Transmitter mismatch occurs, it is because an Infant transmitter has come into contact with the Baby Check transmitter. In this case, you should follow your facility’s established procedures to secure and separate the infant from the mismatched Baby Check. Clear the alarm at the Client computer, remembering to select an event cause.
J
Jamie JohnsonAug 13, 2025
Why is my RF Technologies 9450 Baby Check Transmitter in link mode?
- R
  Robert Christensen DDSAug 13, 2025
  The button on the Baby Check transmitter is pressed once to verify it is ready to be linked.

RF Technologies 9450 Specifications

General

Brand	RF Technologies
Model	9450
Category	Transmitter
Language	English

Summary

Important Warnings

Accessories (Supplies)

Ensure patient safety and proper operation using specified parts.

Explosion Hazard

Do not use devices in presence of flammable gas mixtures or oxygen enriched atmospheres.

Installation and Configuration

Facility responsibility to follow instructions and use specified components.

Instructions for Set Up and Use

Facility responsibility to follow manual instructions and use specified components.

Mismatch Alarm Procedures

Establish procedures for staff to follow in case of a mismatch alarm.

Preface Overview

Overview

Provides general information about the Baby Check transmitter and the 9450 System.

9450 System

Details the function of the 9450 System in monitoring patients and assets.

Chapter 1 Transmitters

Introduction to the Baby Check Transmitter

An overview of the Baby Check transmitter's role and functionality.

Mounting of Baby Check Transmitter Wall Bracket

Link a Baby Check Transmitter

Verify a Baby Check/Infant Match

Baby Check Transmitter Functionality

Required Transmitter Testing

You must test transmitters to verify their functionality prior to use.

Transmitter Testing and Clearing

Required Weekly Testing

Transmitters in use must be tested at least weekly for operation and inspection.

Clear a Baby Check Transmitter

Procedure to clear a Baby Check transmitter using the Transmitter Clearing Device.

Cleaning and Caring for a Transmitter

Approved Cleaners for Transmitter

Chapter 2 Transmitter Clearing Device

The Transmitter Clearing Device

Description of the Transmitter Clearing Device, its features, and lifespan.

Transmitter Clearing Device Testing

Chapter 3 Alarms and Troubleshooting

Baby Check Alarms Overview

Baby Check alarms are High Priority and displayed on the Safe Place Computer.

Mismatch Alarm

Details the Mismatch Alarm, how to respond, and common causes.

Link Alarm and LED Troubleshooting

Link Alarm

Details the Link Alarm, how to respond, and common causes.

LED Troubleshooting

Explains the meanings of LED lights and audible beeps on the transmitter.

Transmitter Link Status and Clearing

Transmitter Link Status Indicators

Describes the meaning of LED flashes (Amber, Green, Red) for transmitter status.

Transmitter Cleared Status

Indicates when the Baby Check transmitter has been cleared and how to store it.

Discharge Troubleshooting

Discharging a Linked Transmitter

Procedure for discharging a linked Baby Check and Infant transmitter.

Discharge Alarm Scenarios

Lists alarms that occur if a match was not performed during discharge.

Chapter 4 Specifications

Baby Check Transmitter Specifications

Lists size, weight, color, operating temperature, battery life, regulations, and part numbers.

Transmitter Clearing Device Specifications