Address：S601 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian P.R.C
Tel：4008 592 315 Fax：+86 592 5788216
Email: support@rgblink.com http://www.rgblink.com
The operation process and precautions of PTZ
camera control on RGBlink mini+
Note: Please make sure your PTZ camera supports the Sony Visca protocol.
1. Connect mini+ and PTZ camera:
1.1 Connect mini+ and PTZ camera directly:
Suppose the IP address of mini+ is 192.168.1.101, and the default IP address of
the PTZ camera is 192.168.100.88.
1.1.1 Connect the mini+ to the PTZ camera with a network cable.
1.1.2 Press the M button on the mini+ and turn the right rotary knob(Y rotary
knob) to IP SETTING.
1.1.3 Modify the IP address of mini+ to 192.168.100.101 by operating the right
rotary knob(Y rotary knob).
To Next Page
Need help?
General
