Rheem AP16697 - Electronic Control Status and Error Codes; Checking Heater Operational Status; Viewing Error History Log; Interpreting Error Display Messages

18
Programming the Electronic Control
– HEAT
– UPPER TEMP
– LOWER TEMP
SCROLL
PRESS TO
SELECT
STATUS
HISTORY
Use DOWN arrow to scroll
through the menu. Press
MENU/SELECT buon to
acvate menu item.
HEAT will display if an element
is on or off.
Choosing UPPER or LOWER
TEMP will display the current
temperature reading for that
sensor.
History menu lists the 10 most
recent error codes.
Use the DOWN arrow to scroll
the codes.
ERROR DISPLAY
ERROR SYMBOL
History menu lists the 10 most recent
error codes.
Press the BACK/STATUS buon to show
the most recent error code. Use the
DOWN arrow to scroll the codes.
See following sheet for all error codes,
scrolling messages and recommended
acon.
*Note: If screen is
dimmed press any
buon and release
to brighten the
display before
performing desired
acon.